ECOWATERBOXX

HOME    |    SPECIFICATIONS    |    PROJECTS    |    DOWNLOADS    |    CONTACT US    |    AQUAKERB

Control-Box® Specifications

Material

Control-Box® is manufactured from High Impact Polypropylene with UV protection.

Data

CONTROL-BOX

 

 

WEIGHT

STORAGE

MODULES

DIMENSIONS (L x W x H)

CUBIC CAPACITY

KG (approx)

LITRES (approx)

Single Module

600mm x 600mm x 600mm

 0.216m³

9.8

206.2

4.63 modules

 

1m³

45.45

954

46.3 modules

 

10m³

454.5

9,540

463 modules

 

100m³

4,545

95,400

4,630 modules

 

1,000m³

45,450

954,000

 

LOAD

INSTALLATION DEPTH

 

 

 

Walkable

Min 0.2m*

 

 

 

Car

Min 0.3m*

 

 

 

B-Double (9t axle)

Min 0.6m*

 

 

 

Mobile Crane (12t axle)

Min 0.7m*

 

 

 

Maximum top cover (metres)

2.4

 

 

 

Maximum layers

4

 

 

 

Maximum depth (metres)

3

 

 

 

Flow rate

open design

 

 

 

Pipe connector - outer diameter (mm)

110, 160, 200, 315, 500

 

 

* Assumptions: Bearing at depth 1H:2V dispersion angle, Ultimate pressure calculations 1.2DL and 1.5LL, soil coefficient 0.35 (1H-one horizontal, 2V-two vertical, DL-soil load, LL-axle load)




Control-Box® Single Piece

Single pieces flat packed

Control-Box® Endplate

Palletised in assembled sections

Control-Box® infiltration assembly - fed by an external sump.



Disclaimer: These details offer a guide only to the application and installation of Control-Box® . Ecowaterboxx Pty Ltd recommends that installers of Control-Box® seek professional advice to verify the intended use, positioning and installation procedure are compliant with applicable statutory and engineering requirements. As Ecowaterboxx Pty Ltd has no direct control over the application and installation of Control-Box® , no responsibility is accepted by Ecowaterboxx Pty Ltd and its distributors and agents. Ecowaterboxx Pty Ltd reserves the right to change specifications and design without notice.